A chain with a ring is a classic practical option. The cord keychain is lightweight. The fastening on a metal carabiner makes it easy to snap the keychain onto any item. As mentioned above, the main part of the key rings is a branded element with a logo. Types and applied technologies of key fob branding: 1. Metallic: A) Etched The etching process involves the chemical interaction of a metal (brass) and an acid. The result is a flat keychain with a three-dimensional image in the form of up-and-down metal height differences (a similar product is a coin). The recess in the presence of colored parts in the layout is covered with enamels. Mechanical processing is allowed to obtain a smooth or matt surface. The shape of the product can follow the streamlined contours of the logo. The etching method is used for any circulation . Production time - 12-14 working days. B) Stamped The essence of the technological process lies in the cutting of blanks for future key rings from brass with a punch-shape. The finished product is covered with a galvanic coating (galvanic gilding or nickel), cold enamels. Due to the cost of the punching mold, the use of stamping is economically justified with a circulation of 100 pcs. or if you need to achieve a specific depth of lines for a logo or graphic. Terms of 21-25 business days. B) Cast In this way, three-dimensional key rings are made (in the form of a cylinder, cube, etc.), key rings with small sloping details in the figure, a complex contour or through holes. Molten metal is poured into the wax mold, which is polished after solidification. Cast key rings are nickel-plated or electroplated. This technology for making key fobs is rarely used. It is considered the longest and most expensive. For those who need to make curly key rings from precious metals (silver, gold, platinum), the casting technology is suitable. Recommended minimum circulation from 100 pcs. Terms of 21-30 business days. 2. Plastic (acrylic) key rings: They are acrylic-based resin stickers. A resin nameplate with a full-color image is glued to the acrylic blank on both sides. This three-layer structure (resin nameplate + acrylic layer + resin nameplate) gives the finished keyring strength and volume. The result is a bright and attractive souvenir that is pleasant to carry with you. Minimum circulation - 20 pcs., Recommended - 100-500 pcs. The larger the circulation, the lower the cost of 1 piece. Terms of 6-10 working days , depending on the circulation. 3. Other materials: A) Wooden trinkets. The base is wood or plywood. With the help of laser cutting, a complex shape of products is achieved, the image is applied by laser engraving. Due to the fragility of the material, wood key rings are recommended to be made of small, simple shapes (without protruding elements). B ) plastisol key fobs (they are also called PVC key fobs or rubber key fobs); B ) trinkets of leather or leather by adding inserts. The image is formed by the method of "blind" stamping or made with the use of foil. D) Metal key rings-blanks, the image on which is applied in the form of a resin nameplate or engraved. If you want to buy key rings that will look presentable and will last a long time, we recommend that you pay attention to etched metal products. Such key rings not only have a presentable look, but also have high wear resistance. Due to their low cost and short production time, acrylic key rings are the best option for mass distribution during promotional events. Leather key rings will allow you not to damage the items next to them. Ask the managers for prices, see the photos of key fobs in the relevant sections. If you want to buy click the button beelow